Description

A-200W/400W Solar Panel Kit + Controller Brand new and high quality With a semi-flexible design, you can bent the solar panel appropriately to suit a wider range of applications. The solar panels comes with high conversion rate, high stability and good durability. It has a single crystal R chip and can be used in any place and situation like automobiles, homes, boat, motorcycles, etc. With the strong sun in the summer, the solar panel can efficiently convert solar energy. Equipped with advanced polyethylene coating technology, the surface of the battery is plated with dark blue reflective film. The solar panels can withstand all kinds of environments with high waterproof performance. Anti-scratch, non-foaming, easy to clean. specification: Color: Black No-load voltage: 20.8V DC Short circuit current: 1500mAh Output current: 1000mAh Load voltage: 12V Short circuit current: 2A Output voltage: 18V Charging time: 2 hours Battery panel specification: high-efficiency monocrystalline board Size: 11.3 x 11.3 inches Application: Mobile Conversion rate: 23-24% Working temperature: -40℃+85℃ Type: With 10A-50A controller Application: Car batteries, cars, RVs, ships, airplanes. Package Included: 1x solar panel 4x suction cup 1x clip 1x car charger 1x DC male cable 1x cable (male and female) 1x Controller (Not included Batteries) B/C-6000W/4000W Inverter Product Description: 1. [4000W/6000W Power inverter] Car power inverter with 2 USB ports and AC outlet. surge power: 4000W/6000W, the power inverter comes with free cigarette lighter and 2pcs battery clips, providing 300Watt/500Watt continuous power, 4000watt/6000watt peaks power (Please make sure that the total rated power of the conn ected devices is ≤ 300W/500W). 2. [LED BATTERY DISPLAY] Battery Level Bar for LED Display shows the battery Capacity, which can remind you that when your battery no power. When connect the battery with inverter, this LED Screen work and show the real-time capacity of battery. It has five level (lattice) of the Battery Level Bar, and each lattice represents 20% of the battery power. When your battery is no power, the display will flash to remind you that you need to charge your battery. 3. [Fast Charging Dual USB ports] One AC Outlets and two USB ports can offer 100% fast charging for Mobiles phones, computers, laptop, breast pump, Nebulizer, Razors, medical rescue device, emergency equipment etc., can be as an Emergency Power Supply 4. [Multi Protection] Built-in fuses, safe charging design and cooling fan prevents the car power converter from over-heat, saving power and energy. over voltage, overload, over-current, short circuiting, under-voltage, overheating, short circuit protection. 5. [Lightweight design &Top Quality] Lightweight and compact, ideal for vacations, camping and work trips. It can be plugged into almost any 12V power output vehicle, providing charging opportunities anywhere. Product Specifications: Standard: U.S. Standard Output Peak Power: 4000W/6000W Frequency: 50Hz/ 60Hz USB Output Current: 2 x 2.1A Efficiency: 90% Input Voltage: 9.5-15.5V Output Voltage: 110V/ 220V Output Voltage Range: 110V±10%/ 2200V±10% No-Load Current: <0.7A Low Voltage Protection: 9.5V High Voltage Protection: 15.5V Support: Overload Protection, Short Circuit Protection Product Size: about 22.0 x 10.0 x 14.7cm/ 8.7 x 3.9 x 5.8in Fetures: - 12V is generally for cars, 24V for trucks, 48V and 60V is generally for electric vehicles. - Available Range Of Rated Voltage Of Electrical Appliances : 100~120V - Safe Range Of our inverter Input Voltage:12V (9.8~15V) - 8 Safety Protection Function: ① Reverse polarity protection ②Low input voltage?protection ③High input voltage protection ④Over-current protection ⑤Short circuit protection ⑥Over temperature protection ⑦Overload protection ⑧Internal fuses Package Include: 1 x Converter Adapter 1 x Pair of Battery Clips 1 x Cigarette Lighter 1 x User Manual CAUTION! -1.This is a modified sine wave inverter,NOT applicable for devices which work by built-in motor, hair dryers,air conditioners, coffee machine,water pump, induction cooker,refri gerators and microwave ovens etc.Make sure that the total rated power of the connected devices is ≤ 400W -2.Tighten the Positive (+) and Negative (-) terminals when the car converter is in use -3.If the converter is directly connected with the cigarette lighter. The highest out put power must be under 150W. If higher than 150W,we strongly recommend you using the Crocodile Clips to a battery ,because car cigarette lighter might not afford power over 150W. -4.The car converter suitable for DC12V and Car ONLY, not applied for DC 24V and airplane -5.Please do not leave the inverter in the ON position before car start.It's easy to damage the inverter before connected to the battery.The correct operation is connect to the battery first and then turn on the inverter switch -6. It's normal for the inverter to become warm while you are using it.In order to get the best using results, please put the inverter on the flat surface The working place should meet the following criteria: 1. Keep dry, should not let the inverter contact the water or other liquids, keep the inverter away from moisture or water. 2. Cool environment, keep the temperature between 0 Celsius degrees and 40 Celsius degrees. Do not put the inverter next to heat vents or other devices. Try to keep the inverter not be shined directly by the sunshine. What Size Power Inverter Do I Need? The size you choose depends on the watts (or amps) of what you want to run (find the power consumption by referring to the specification plate on the appliance or tool). We recommend you buy a larger model than you think you'll need (at least 10% to 20% more than your largest load). F-100A Controller Description： -100% brand new and high quality. -Advanced maximum power point tracking technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. -Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. -Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. -Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. -Real-time display of temperature, charging current and discharge current. Current autofocus tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Specifications: Name: LCD screen solar controller Voltage: DC 12V / 24V Display: LCD screen Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 ℃ -60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 100A battery 12V photovoltaic system: power is respectively 100-650W 100A battery 24V photovoltaic system: power is respectively 200-1300W Package Included: 1X Solar Panels Battery Charge Controller 1X User Manual Notes: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power. The LCD display has an error of 0.2 V- 0.3 V, but this is normal. Old batteries may be degraded the capacity after hundereds of cycles, easily drop lower than 8V, which results in the controller will be shut off (LCD screen become totally “DEAD”). Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation.